Arduino Computer Parts

Arduino Gsm Shield With Integrated Antenna

Consumers Rate this Rating 5 Stars
Gsm Shield With Integrated Antenna


The Gsm Shield With Integrated Antenna is a brilliant item for the do it yourselfers. I certainly liked that the product had it is recommended that the board be powered with an external power supply that can provide between 700m an and 1000m a. Additional features include quad band gsm and arduino gsm shield. The Arduino part dimensions are 3" Height x 4" Length x 1" Width and it has a weight of 0.13 lbs. To take advantage of the bargain I uncovered, click on the link on this site.

The Arduino GSM Shield allows an Arduino board to connect to the internet, make/receive voice calls and send/receive SMS messages. The GSM library has a sizable quantity of methods for communication with every of the shield. The shield makes use of a radio modem M10 by Quectel (datasheet ). It truly is attainable to communicate utilizing the board using AT commands.

The shield uses digital pins 2 and 3 for computer software serial communication with the M10. Pin 2 is connected for the M10's TX pin and pin 3 to its RX pin. See these notes for operating with an Arduino Mega, Mega ADK, or Leonardo. The modem's PWRKEY pin is connected to Arduino pin 7.

The M10 can be a Quad-band GSM/GPRS modem that works at frequencies GSM850MHz, GSM900MHz, DCS1800MHz and PCS1900MHz. It supports TCP/UDP and HTTP protocols via a GPRS connection. See the getting started page for additional information on SIM usage. GPRS information downlink and uplink transfer speed maximum is 85. 6 kbps. To interface using the cellular network, the board calls for a SIM card provided by a network operator.

The most latest revision of the board utilizes the 1. 0 pinout on rev 3 of the Arduino Uno board. Notes on the Telefonica/Bluevia SIM included employing the shield

The GSM shield comes bundled with a SIM from Telefonica/Bluevia that will work well for developing machine to machine (M2M) applications. Activation of the SIM is handled by Bluevia. It's not necessary to use this distinct card with all of the shield. The SIM genuinely should be inserted into a powered GSM shield that is mounted on an Arduino for activation. You may use any SIM that works on a network in your area. There is coverage throughout the Americas and Europe for this SIM, check the Bluevia service availability page for specific countries which have supported networks. It might be used on any supported GSM network. The Bluevia SIM card consists of a roaming program.


© 2020 By Arduino Computer Parts - All Rights Reserved.